The dates for the Professional MagNet training courses are now available.

Please check the Events section for more details, and send us the registration form with the right date for you.

In case you have any questions you can contact us by email at:
enquiries@infologicdesign.co.uk

The new update of TrafoSolve from Infologic Design was released in October, and is now ready for download by all our supported customers, and for evaluation.

New features in this new release include the following.

• Added the Force calculation wizard to launch the results from one location.
• Added an ability to presents results in RMS or Peak values in the PD result section.

For a detailed list of new features, refer to the product-specific release notes available in the installed software tree once it is installed.

If you would like to evaluate the latest version of the software, please contact us.

The new update of TrafoSolve from Infologic Design was released in October, and is now ready for download by all our supported customers, and for evaluation.

New features in this new release include the following.

• An option for manual mesh settings in TransformerBuilder. The user can redefine automatic mesh which might be very dense for 3D mesh, especially on coils.
• Optimization of working process with multiple designs in one Trafosolve file. Now switching between designs is much faster.
• Improving Trafosolve interface and display experience for Korean users.

For a detailed list of new features, refer to the product specific release notes available in the installed software tree once it is installed.

If you would like to evaluate the latest version of the software, please contact us.

The new version of TrafoSolve from Infologic Design was released some time ago, and is now ready for download by all our supported customers, and for evaluation.

New features in this new release include the following.

• Added a function to calculate the Windings losses profiles and the Q factor according to the IEC 60076-2 standard.
• Added an ability to calculate the Winding force profiles.
• Added a pdf report according to the IEC 60076-5 standard and Windings Cumulative force profiles.

For a detailed list of new features, refer to the product specific release notes available in the installed software tree once it is installed.

If you would like to evaluate the latest version of the software, please contact us.

A new version of the Simcenter MAGNET, Simcenter Motorsolve, and Simcenter SPEED products are now available.

New feature Highlights:

• Improved behaviour of the Voltage Waveform Multiplier when transforming components in Simcenter Magnet Electric.
• Added a parameter to check which version of Magnet modified the model last (Can be used for scripting in conjunction with HEEDS software).
• Added a heat source property field for Simcenter MAGNET Thermal.

If you would like to evaluate the latest version of the software, please contact us.

The new version of TrafoSolve from Infologic Design was released a few days ago, and is now ready for download by all our supported customers, and for evaluation.

New features in this new release include the following.

• Partial discharge phenomena analysis is now available
• Added the possibility to define the air gaps during the reactor calculations
• Added the "Quad" wire type
• Added a coil wizard for Layer and Helical type windings
• Added the possibility to show curves on logarithmic scale

For a detailed list of new features, refer to the product specific release notes available in the installed software tree once it is installed.

If you would like to evaluate the latest version of the software when it is available, contact us.

A new version of the Simcenter MAGNET, Simcenter Motorsolve, and Simcenter SPEED products are now available.

For a detailed list of new features, refer to the product specific release notes or README file, available in the installed software tree once it is installed.

If you would like to evaluate the latest version of the software when it is available, contact us.

The new version of TrafoSolve from Infologic Design was released a few days ago, and is now ready for download by all our supported customers, and for evaluation.

TrafoSolve v2.1

TrafoSolve from Infologic Design provides an automatic control of the Simcenter MAGNET Suite of products for rapid transformer design. It is an easy and logical interface, allowing users to input transformer characteristics quickly, and to select the type of results required, such as Short circuit analysis, Force calculation, Harmonic analysis, Open Circuit, or Temperature analysis.

The data input using the simple user interface is used to build a Simcenter MAGNET model, and to run the appropriate analyses. The results are then extracted and put back into the TrafoSolve user interface module.

New features in this new release include the following.

• templates - users can create their own templates within TrafoSolve, save them, and subsequently load these as required to quickly try out new variations of a design
• wire schematics window - this allows the user to see conductor dimensions for every type of wire (rectangular, round, foil, twin, triple, CTC, and Litz)
• new Coil Wizard for disc type windings
• extended force calculation to include buckling, bending and tilting forces.

If you would like to evaluate the latest version of the software, contact us.

A new version of the Simcenter MAGNET, Simcenter Motorsolve, and Simcenter SPEED products are now available.

For a detailed list of new features, refer to the product specific release notes or README file, available in the installed software tree once it is installed.

If you would like to evaluate the latest version of the software when it is available, contact us.

The new version of TrafoSolve was released a few days ago, and is now ready for download by all our supported customers, and for evaluation.

TrafoSolve v2.0

TrafoSolve from Infologic Design provides an automatic control of the Simcenter MAGNET Suite of products for rapid transformer design. It is an easy and logical interface, allowing users to input transformer characteristics quickly, and to select the type of results required, such as Short circuit analysis, Force calculation, Harmonic analysis, Open Circuit, or Temperature analysis.

The data input using the simple user interface is used to build a Simcenter MAGNET model, and to run the appropriate analyses. The results are then extracted and put back into the TrafoSolve user interface module.

In Version 2 the user interface have been upgraded significantly, including options to build 3D transformers from the same interface.

If you would like to evaluate the latest version of the software, contact us.

A new version of the Simcenter MAGNET and Simcenter Motorsolve products have been released today, which include a number of new exciting features.

For a detailed list of new features, refer to the product specific release notes or README file, available in the installed software tree.

If you would like to evaluate the latest version of the software, contact us.

A new version of the Simcenter MAGNET and Motorsolve products have been released recently, which include a number of new features, plus a new licensing system. For a detailed list of new features, refer to the product specific release notes manual or README file, available in the installed software tree.

If you would like to evaluate the latest version of the software, contact us.

Want to close the loop and address eMotor noise at concept phase?

During this webinar, a Mentor engineer will explain how to achieve excellent NVH behavior, while perfectly balancing efficiency, torque and thermal management.

To reduce motor noise to the target level and avoid high frequency tonal noise on critical frequencies, Mentor offers 2 methodologies along the V-cycle:

NVH risk assessment at concept stage: Take NVH into account when sizing the electric & electromagnetic system and integrate with multi-physics system modeling such as thermal, controls, efficiency, performance.

3D simulation in detailed design stage: Close the gap between electric currents and noise radiation by combining and integrating electromagnetic, structural, transmission multibody and acoustic simulation in one environment.

This web seminar will introduce part of the Simcenter traction motor low-frequency electromagnetic-thermal CFD solution. The solution will show how to quickly set up the motor model and analyse its electromagnetic and thermal performance in Simcenter Motorsolve™. Since thermal analysis is mainly a 3D problem, 3D features such as end-windings will be added in Simcenter MAGNET and the model solved for electromagnetic heat-losses.

The losses will be transferred into Simcenter FLOEFD™, and together with HEEDS™, the housing will be optimised to improve cooling by accounting for the flow rates and the allowable pressure drop.